Table of Contents
Advertisement
Simple Rx / Tx Test in Packet Mode
This section gives a brief introduction on how to Transmit and Receive a packet using the ADF7023 Platform.
Rx Setup in Packet Mode
The settings which follow are for use with EVAL-ADF7023DB1z daughter boards. If you are using a
different Daughter board, ensure that the frequency is set within the correct range of the board you are
using. Please refer to Table 1 Evaluation Boards if you are unsure what the frequency range of you board
is designed for.
R e v 1 . 1
| Page 23
Advertisement
Table of Contents
Need help?
Do you have a question about the EVAL-ADF7023DBxZ and is the answer not in the manual?
Questions and answers