Diagnostic Trace Status Object - Festo CPX-FB11 Manual

C. DeviceNet objects with Modular EDS
Attr. Access Designation
no.
110 Get Fault number
111 Get Subsequent
channels
1)
d (diagnostic event) = 0 ... 39; most current diagnostic event = 0
2)
Measured from the moment the power supply is switched on
3)
If the fault number = 0, the contents are also 0. If the fault number lies between 128 ... 199
(fault class 3), the contents are not relevant (servicing required).
C.1.14 Diagnostic trace status object
Attr. no. Access
100 Get
101 Get
102 Get/Set
103 Get/Set
104 Get/Set
105 Get/Set
Festo P.BE−CPX−FB11−EN en 0503b
Description
See System manual chap. 5,
Possible fault messages"
Number of subsequent
3)
channels with the same fault
Object class:
Instances:
Name
Number of Trace entries in the diagnostic memory USINT
Status of diagnostic memory
0: Registering active
1: Registering inactive
Clear_trace1, access via EDS
Clear_trace2, access via explicit messaging;
Confirms activity carried out by resetting (0) the
attribute value
Entries remanent with Power on
1: Inactive
0: Active (presetting)
Run/stop filter 1
0: Stop after 40 entries (save the first 40 entries)
1: Overwrite old entries (save the last 40 entries,
presetting)
Type
USINT
USINT
117
1
Function no.
3488 + n
n = 10 * d + 8
n = 10 * d + 9
Type Function no.
3482
(bit 0 ... 7)
BYTE 3483
(bits 0, 1)
USINT
USINT
USINT 3480
(bit 0)
USINT 3480
(bit 1)
C−31