Object, Modification Analogue Inputs - Festo CPX-FB11 Manual

B. DeviceNet objects with Standard EDS
B.1.9 Object, modification analogue inputs
Attr. no. Access
100 Get/Set
101 Get/Set
1)
Identical with the distribution of the data block of analogue input data. The value is congruent
with the value of the analogue input channel.
B−18
Object class:
Instances:
The Force, Fail safe and Idle parameters for the analogue in
puts are administered in this object. The first analogue input
(channel 0) is administered in instance 1. The second ana
logue input (channel 1) in instance 2 etc.
The force mode for the analogue input of this instance is
enabled or blocked in attribute 100. This enable function is
switched after the system function which affects all channels
(placed in System object 114, attribute 121).
Information on the assignment can be found in section B.1.5
and section A.4.2.
Data source
Force mode of the relevant channel
Force state of the relevant channel
111
1 ... 32
Type
USINT
1)
INT
Festo P.BE−CPX−FB11−EN en 0503b
Function no.