B.4.5 Diagnostic Trace Status Object - Festo CPX-FB32 Electronic Manual

B. Ethernet/IP Objects of the CPX−FB32

B.4.5 Diagnostic Trace Status Object

Attr. Access Name
no.
1 Get Number of Trace entries in the diagnostic memory
2 Get Status of diagnostic memory
0: Registering active
1: Registering inactive
3 Get/Set Clear_trace1, access via EDS
4 Get/Set Clear_trace2, access via explicit messaging;
Confirms activity carried out by resetting (0) the
attribute value
5 Get/Set Entries remanent with Power on
0: active (presetting)
1: inactive
6 Get/Set Run/Stop filter 1
0: Stop after 40 entries (save the first 40 entries)
1: Overwrite old entries (save the last 40 entries),
7 Get/Set Run/Stop filter 2
0: Run/stop filter 2 inactive (presetting)
1: Register up to the defined FN
2: Register up to the defined FN + MN
3: Register up to the defined FN + MN + CN
4: Register as from the defined FN
5: Register as from the defined FN + MN
6: Register as from the defined FN + MN + CN
7: Reserved
MN = module number
CN = channel number
FN = fault number
Festo P.BE−CPX−FB32−EN en 0605NH
Object class:
Instances:
presetting)
135
1
Type Function
no.
BYTE 3482
(bit 0...7)
BYTE 3483
(bits 0, 1)
BYTE
BYTE
BYTE 3480
(bit 0)
BYTE 3480
(bit 1)
BYTE 3484
(bit 0...2)
B−21