Object, Modification Digital Outputs - Festo CPX-FB11 Manual

B. DeviceNet objects with Standard EDS
B.1.6 Object, modification digital outputs
Attr. no. Access
100 Get/Set
101 Get/Set
102 Get/Set
103 Get/Set
104 Get/Set
105 Get/Set
1)
Identical with the assignment of the data block of the digital outputs
Festo P.BE−CPX−FB11−EN en 0503b
Object class:
Instances:
The Force, Fail safe and Idle parameters of the digital outputs
are split into words (16 bits) and distributed among the max.
32 instances of this object. There is no module orientation.
The existing digital outputs are assigned in blocks of 16 bits
in ascending order without gaps.
The first output word of the digital outputs is administered in
instance 1. The second in instance 2 etc.
Information on the assignment can be found in section B.1.5
and section A.4.2.
Description
Force mode parameter for output word n
Force state parameter for output word n
Fault mode parameter for output word n
Fault state parameter for output word n
Idle mode parameter for output word n
Idle state parameter for output word n
107
1 ... 32
Type
1)
WORD
1)
WORD
1)
WORD
1)
WORD
1)
WORD
1)
WORD
Function no.
B−15