The Time & Date Menu - GE PanaFlow MV80 User Manual

Chapter 3. Operating Instructions
3.3.11 The Time & Date Menu
Use the Time and Date Menu (see Figure 63 below) to enter the correct time and date into the flowmeter's memory.
The parameters are used in the Run Mode and the alarm and system log files.
Note: Time is displayed in AM/PM format, but military format is used to set the time. For example, 1:00 PM is
entered as 13:00:00 in the Set Time menu.
This example shows how to set the time to 12:00:00. You can check the time in Run Mode by pressing the
until the Time & Date screen appears.
Note: All outputs are disabled while using the Setup Menus.
1. Use keys to move to the Time and Date Menu.
2. Press the key until Set Time appears. Press ENTER.
3. Press the key until 1 appears. Press the
until 2 appears. Continue sequence until all desired parameters are entered. Press ENTER to return to the Time
and Date Menu.
4. Press EXIT to return to Run Mode.
68
ENTER
Run Mode
Figure 63: The Time & Date Menu
key to move the underline cursor to the next digit. Press the
Password
ENTER
Use
Menu
keys to access menus
Set Time
xx:xx:xx
Set Date
xx/xx/xx
PanaFlow™ MV80 & MV82 User's Manual
keys
key