The Fluid Menu - GE PanaFlow MV80 User Manual

3.3.9 The Fluid Menu

Use the Fluid Menu (see Figure 61 on page 66) to configure the flowmeter for use with common gases, liquids and
steam. Your flowmeter is pre-programmed at the factory for your application's process fluid.
Reference Richard W. Miller, Flow Measurement Engineering Handbook (Third Edition, 1996), page 2-75 for
definition and use of the Goyal-Doraiswamy equation and page 2-76 for the definition and use of the API 2540
equation. Also, see Appendix C for Fluid Calculation equations.
The units of measurement used in the Fluid Menu are preset and are as follows:
•
Mole Weight = lb
m
•
CRIT PRESS = psia
•
CRIT TEMP = °R
•
3
Density = Kg/m
•
Viscosity = cP (centipoise).
PanaFlow™ MV80 & MV82 User's Manual
/(lb ·mol)
m
Chapter 3. Operating Instructions
65