Table of Contents
Advertisement
Chapter 5. Troubleshooting and Repair
WARNING!
remove the main power before disassembling any part of the mass flowmeter.
5.1 Hidden Diagnostics Menus
The menus shown in Figure 77 on page 110 can be accessed using the password
following steps:
1. Navigate to the display that reads Diagnostics Menu.
2. Press ENTER instead of one of the arrow keys.
3. Use the RIGHT arrow key to move to the second column.
4. Press EXIT to move from the second column back to the first column.
5. Press EXIT while in the first column to return to the setup menus.
CAUTION!
to avoid changes that can adversely alter the function of the meter.
Each of the menus in Figure 77 on page 110 are defined and specific troubleshooting steps are described in the
following sections.
PanaFlow™ MV80 & MV82 User's Manual
Before attempting any flowmeter repair, verify that the line is not pressurized. Always
Password
allows full access to meter configuration and should be used carefully
16363
Chapter 5. Troubleshooting and Repair
16363
and then completing the
109
Advertisement
Table of Contents
Troubleshooting
