GE PanaFlow MV80 User Manual page 144

Appendix A. Product Specifications
Wetted Materials
Series MV80 In-Line Flowmeter:
316L stainless steel standard
C276 hastelloy or A105 carbon steel optional
Series MV82 Insertion Flowmeter:
316L stainless steel standard.
Teflon® packing gland below 500° F (260° C)
Graphite packing gland above 500° F (260° C)
Enclosure Protection Classification
NEMA 4X and IP66 cast enclosure
Electrical Ports
Two 3/4-inch female NPT ports
Mounting Connections
Series MV80: Wafer, 150, 300, 600 lb ANSI flange, PN16, PN40, PN64 flange
Series MV82 Permanent installation: 2-inch MNPT; 150, 300, 600 lb ANSI flange, PN16, PN40, PN64
flange with compression fitting probe seal
1
Series MV82 Hot Tap Installation: 2-inch MNPT; 150, 300, 600 lb ANSI flange, PN16, PN40, PN64
1
flange and optional retractor with packing gland probe seal. Removable under line pressure
Mounting Position
Series MV80 In-Line Flowmeter: No effect
Series MV82 Insertion Flowmeter: Meter must be perpendicular within ±5° of the pipe centerline
Certifications
Material Certificate - US Mill certifications on all wetted parts
Pressure Test Certificate
Certificate of Conformance
NACE Certification (MR0175-2003)
Oxygen Cleaning (CGA G-4)
132 PanaFlow™ MV80 & MV82 User's Manual