Logs Page - AMX N2412A Instruction Manual

TABLE 36
Option
Decode button
Encode button

Logs Page

Click the Logs link at the top of any of the main web pages to access the page shown in
command log that lists all TCP and UDP messages the unit receives. It also displays the web browser's IP address and gives you
options to Refresh and Reset Logs. When in need of assistance from tech support, you can use the Debug Log section to capture
useful troubleshooting information. Simply click the Start Debug Log button, wait at least one minute, and click the End Debug Log
button to create the file. You can then download and send it to AMX tech support.
Logs Page
FIG. 60
NOTE: For security reasons, only use the Enable Maintenance Mode if instructed by AMX Technical Support. This selection only
appears in the secure version of the website (i.e., https).
N2412A/N2422A User Manual
EDID Page Options (Cont.)
Description
Click to translate the EDID currently displayed on the left to the operating parameters list on the right.
After making any changes to the operating parameters list on the right, click this button to update the EDID
information on the left.
Decoder Configuration Options
Figure 60. The Logs page displays a
63