Kvm Page - AMX N2412A Instruction Manual

TABLE 34
Option
Change 802.1x User
Name/Password
Custom Config File

KVM Page

Click the KVM link at the top of any of the main web pages to access the N-Series KVM page. You must check the USB Enable box at
the top to see the page shown in
KVM Page
FIG. 58
TABLE 35
Option
USB Enable
Permission Level
Connect to Encoder IP
Address
KVM Advanced Settings Enable to access the KVM Encoders list and the related options.
N2412A/N2422A User Manual
Security Page Options
Description
Enter a new user name and password to use for 802.1x security. They are used when negotiating a
secure port with the network. These settings are available only when Configuration is set to Simple.
Upload a custom wpa_supplicant.conf file. See your network administrator for details. This option is
available only when Configuration is set to Custom.
Figure 58. See
KVM Page Options
Description
Enable to allow the ability to share mouse and keyboard over the network. Enabled by default. When disabled,
the unit works like a non-KVM unit and ignores any keyboard or mouse activity.
Set the permission level for the Decoder. Decoders can only establish USB connection to Encoders with the
same or higher permission level.
Enter the IP address of the Encoder you would like to communicate with through this Decoder. Use the Switch
button to activate connection and the Disconnect button to deactivate it.
Table 35 for option descriptions.
Decoder Configuration Options
61