Kvm Page - AMX N2412A Instruction Manual

TABLE 14
Option
Change 802.1x User
Name/Password
Custom Config File

KVM Page

Click the KVM link at the top of any of the main web pages to access the N-Series KVM page. You must check the USB Enable box at
the top to see the page shown in
KVM Page
FIG. 34
TABLE 15
Option
USB Enable
Multiaccess
Permission Level
Import KVM CSV
Export KVM CSV
Reset USB and KVM
Settings
N2412A/N2422A User Manual
Security Page Options
Description
Enter a new user name and password to use for 802.1x security. They are used when negotiating a
secure port with the network. These settings are available only when Configuration is set to Simple.
Upload a custom wpa_supplicant.conf file. See your network administrator for details. This option is
available only when Configuration is set to Custom.
Figure 34. See
KVM Page Options
Description
Enable to allow the ability to share mouse and keyboard over the network. Enabled by default. When disabled,
the unit works like a non-KVM unit and ignores any keyboard or mouse activity.
Enable to allow multiple Decoders to access this Encoder at the same time. (maximum is 100 connections).
Set the permission level for the Encoder. Decoders can only establish USB connection to Encoders with the
same or higher permission level.
Click the Choose File button and browse to the KVM CSV file on your computer that you would like to use to
configure the unit. Then click Upload.
Click the Download KVM CSV Export link to retrieve the current KVM CSV configuration file.
Resets all USB and KVM settings.
Table 15 for option descriptions.
Encoder Configuration Options
39