AMX N2412A Instruction Manual page 31

Settings Page: Status Section
TABLE 6
Option
HDMI Status
Source Resolution
HDMI Status Pass Thru
Current Bandwidth
Port 50001 Source IP
Port 50002 Source IP
Serial Source IP
Flush buttons
KVM IP
Port P0
Port P1
N2412A/N2422A User Manual
Description
Indicates if data is being sent to the HDMI port.
Indicates the video resolution of the currently
connected source.
Indicates if a display device is connected to the
Encoder.
This is a snapshot of the unit as properties were loaded
to the browser, not a live counter. Refresh the page to
get an updated bandwidth.
Shows the IP address of the currently connected device
or displays Disconnected if no connection exists.
Shows the IP address of the currently connected device
or displays Disconnected if no connection exists.
Shows the IP address of the currently connected device
or displays Disconnected if no connection exists.
These buttons reset the port.
If a KVM Decoder is currently connected to this
Encoder, its IP address displays here.
Shows the IP address of the currently connected device
or displays Disconnected if no connection exists.
Shows the IP address of the currently connected device
or displays Disconnected if no connection exists.
Encoder Configuration Options
Notes
Port 50001 can only accept a single external
connection at a time. If a device is currently showing
the port occupied (by a control system or other
device), then other connections will be rejected.
However, connection attempts from the same IP will
override the current connection.
Port 50002 can only accept a single external
connection at a time. If a device is currently showing
the port occupied (by a control system or other
device), then other connections will be rejected.
However, connection attempts from the same IP will
override the current connection.
Only a single external connection can be accepted on
the port. If a device is currently showing the port
occupied (by a control system or other device), then
other connections will be rejected. However,
connection attempts from the same IP will override
the current connection.
31