AMX N2412A Instruction Manual page 19

Step 5: Connecting Encoders to an Input Source
Having already connected the Encoder(s) to the network and made the appropriate settings changes (as described in
Step 4), you can now connect to the appropriate AV source(s). This connection from an Encoder HDMI IN port (female) to an input
source is accomplished using either an HDMI cable or DVI-I (through adapter).
1. Connect the source you would like to use for the Encoder (camera, laptop, etc.) to the Encoder's HDMI IN port using an HDMI
cable. This connection can be digital or analog.
2. Repeat until all Encoders are connected to their sources.
Encoder Connection to Source
FIG. 15
N2412A/N2422A User Manual
N2412A Encoder
Cat-5 Cable
PoE+ Enabled Switch
Installing and Configuring Your AV Equipment
HDMI Cable
Step 3 and
Network
19