Advanced Settings - AMX N2412A Instruction Manual

Advanced Settings

The section of the Settings page shown in
in Table 20.
Advanced Settings
FIG. 43
TABLE 20
Option
Input audio for
LocalPlay
YUV Output
Simplified HDMI Detect
Last Frame Hold
Local Play Holdoff
HDMI off on stream loss Select to disable the video output drive when the video
HDMI Enable
Gratuitous ARP
ARP Interval (secs)
N2412A/N2422A User Manual
Settings Page: Advanced Settings
Description
Select to enable the input audio when the Live/Local
menu is set to one of the local images.
Set YUV output to be disabled, enabled, or selected
automatically based on the connected display.
Select to enable the detection of a display device using
a simple line level check.
Select to cause the Decoder to continue playing the last
valid video frame if the network connection is lost.
Enter a delay time (in seconds) that will be the holdoff
period before the unit transitions to local play.
stream is not available.
Select to enable output video.
Enable the Decoder to send a periodic Address
Resolution Protocol (ARP) packet to the network.
Determine how often (in seconds) the unit transmits
gratuitous ARP packets.
Figure 43 is displayed when you click the Advanced Settings link. Options are described
Decoder Configuration Options
Notes
When enabled, Local Play will not appear.
The last frame will hold until the specified amount of
time passes. Then the unit transitions to Local Play.
48