Logs Page - AMX N2412A Instruction Manual

TABLE 16
Option
Set EDID to Pass-thru
Reset EDID

Logs Page

Click the Logs link at the top of any of the main web pages to access the page shown in
command log that lists all TCP and UDP messages the unit receives. It also displays the web browser's IP address and gives you
options to Refresh and Reset Logs. When in need of assistance from tech support, you can use the Debug Log section to capture
useful troubleshooting information. Simply click the Start Debug Log button, wait at least one minute, and click the End Debug Log
button to create the file. You can then download and send it to AMX tech support.
Logs Page
FIG. 36
NOTE: For security reasons, only use the Enable Maintenance Mode if instructed by AMX Technical Support. This selection only
appears in the secure version of the website (i.e., https).
N2412A/N2422A User Manual
EDID Page Options (Cont.)
Description
Set the EDID to the pass-thru EDID of the connected display to HDMI OUT.
For Digital, choose a standard EDID from the drop-down menu and click Reset EDID to apply. For Analog, no
selection is necessary.
Encoder Configuration Options
Figure 36. The Logs page displays a
41