Starting Screenshotclient; Connecting Screenshotclient With The Demo Software - HEIDENHAIN QUADRA-CHEK 2000 Demo User Manual

ScreenshotClient | Starting ScreenshotClient
7.3

Starting ScreenshotClient

Select in succession in Microsoft Windows:
Start
All programs
HEIDENHAIN
QUADRA-CHEK 2000 Demo
ScreenshotClient
ScreenshotClient is started:
Figure 37: ScreenshotClient has been started (not connected yet)
You cannot connect ScreenshotClient with the demo software or with the unit
7.4

Connecting ScreenshotClient with the demo software

Before establishing a connection with ScreenshotClient, first start the
demo software or switch on the unit. Otherwise ScreenshotClient will
show the status message Connection close. when trying to connect
Start the demo software if you have not already done so
Further information:
Tap Connect
A connection with the demo software is established
The status message is updated
The Identifier and Language input fields become active
HEIDENHAIN | QUADRA-CHEK 2000 Demo | User's Manual | 06/2018
"Starting QUADRA-CHEK 2000 Demo", Page 23
7
85