Table of Contents
Advertisement
3
Operating
element
1
5
38
Short description
Feature list
2
The feature list contains a list of all features that have been
measured, constructed, or defined. The feature list provides
the following information:
1:
Measured feature with symbol, name, and
4
3
consecutive number
2:
Function that was used for creating the feature
Symbol
3:
Concludes the measuring point acquisition
4:
Number of measuring points that have been acquired
5:
Newly acquired feature with symbol
Each feature contains details on the measurement results
as well as selectable tolerances.
To display the measured values and adjust the
tolerances, drag a feature into the workspace
The detail window with the Overview and Tolerance
tabs opens in the workspace
To select or deselect features, tap the features in
succession
The selected features are highlighted in green
To delete a feature, drag the feature to the right and out
of the Inspector
Measurement result preview
The measurement result preview is displayed in the
workspace after a measurement process is concluded and
shows information about the measured feature. For each
geometry time, it is possible to define which parameters
are shown in the measurement result preview. The respec-
tive geometry type determines which parameters are avail-
able.
Basic Operation | Using the Inspector
Meaning
Measured feature
Constructed feature
Defined feature
HEIDENHAIN | QUADRA-CHEK 2000 Demo | User's Manual | 06/2018
Advertisement
Table of Contents
