Table of Contents
Advertisement
Measurement Report Template | Creating and editing a template
Inserting or removing form fields
The form fields listed below can be inserted into the page header of the
measurement report. During the creation of the measurement report, the form
fields are filled according to the entries made.
Form field
Timestamp
Job
User name
Part number
Fixed text
Variable text
Logo
Resizing a form field
You can adjust the size of the form field using the square handles at the corner of
the field.
Positioning a form field
You can position the form fields in the template according to your own
preferences.
HEIDENHAIN | QUADRA-CHEK 2000 Demo | User's Manual | 06/2018
To insert or remove a form field, tap the form field in the list
Active form fields are indicated by a check mark
The form field is inserted into the template or removed from
the template
Meaning and application
The date and time are inserted.
The job is inserted.
The user name is inserted.
The part number is inserted.
Fixed text is inserted into the template.
Tap the Fixed text form field in the template
An input field opens
Enter the desired text
To close the input field, tap anywhere outside
the input field
Variable text is inserted. You can type the variable
text into the template. When creating the
measurement report, you can overwrite the text as
needed.
A logo is inserted.
Tap the Logo form field in the template
A dialog appears
Select the desired logo in the storage location
Tap OK to close the dialog
The logo is inserted into the template
Tap Grid to use auxiliary lines for easy alignment
Drag the square handle of the corresponding form field to the
desired size
If form fields overlap, the affected area is highlighted in red
The change to the form field is applied
Tap Grid to use auxiliary lines for easy alignment
Drag the form field to the desired position in the template
If form fields overlap, the affected area is highlighted in red
The change to the form field is applied
6
75
Advertisement
Table of Contents
