Measurement Report Template | Creating and editing a template
Adjusting the data table
You can resize the data table with the square handles at the corners of the data
table. The sequence of form fields in the list determines how the columns are
arranged in the table. To adjust the width of the columns in the data table, use the
diamond-shaped handles.
6.2.6
Saving a template
The templates are saved in the XMT data format.
6.2.7
Exiting or canceling the creation of a template
When creating a template, you need to save the template before
closing it. Otherwise, the editing process will be canceled and the
changes will be discarded.
Further information:
6.3
Transferring a measurement report template to the unit
You can transfer a measurement report template from a computer to the unit over
a network or via a USB mass storage device.
HEIDENHAIN | QUADRA-CHEK 2000 Demo | User's Manual | 06/2018
Tap Grid to use auxiliary lines for easy alignment
Use the square handles to resize and position the data table
as needed
To rearrange the columns, long press the form field in the list
and drag it to the desired position in the list
Adjust the column width with the diamond-shaped handles
Columns that are outside the print area are marked red
The changes to the data table are applied
To save the template, tap Save as
The Save as dialog appears
Select the storage location (e. g., Internal/Reports
Enter a name for the template
Confirm entry with RET
Tap Save as
The template is saved and can be used for measurement
reports
"Saving a template", Page 81
Tap Close to exit or cancel the creation of the template or
measurement report
Tap OK to close the message
The editor is closed
6
81