HEIDENHAIN QUADRA-CHEK 2000 Demo User Manual page 54

5
Measuring a circle
A minimum of three measuring points is required to measure a circle. For
measuring point acquisition, you can use the OED measuring tool, for example.
54
Tap Measure in the main menu
Select Manual measuring in the function palette
If multiple sensors are activated, then select OED sensor in
the sensor palette
The geometry palette and the OED measuring tools are
displayed
The workspace now shows the position display
In the quick access menu, select the magnification that is set
on the measuring machine
Select Measure Magic in the geometry palette
or
Select Circle in the geometry palette
Select OED in the tool palette
Cross over the edge of the circle with the OED sensor
multiple times
The unit records the measuring point in the clipboard
To confirm the measuring point acquisition, tap Enter in the
Inspector
A new feature is displayed in the feature list
A new measuring point is recorded every time
you cross over an edge of the feature to be
measured using the OED sensor. The clipboard
is updated with the newly recorded measuring
point. If you tap Enter in the Inspector, then only
the most recently acquired measuring point is
confirmed.
To acquire more than one measuring point along the edge,
repeat the process
Tap Finish in the new feature
A new feature is calculated from the captured measuring
points and the selected geometry
The measured circle is displayed in the features preview
The measurement result preview is now displayed
Quick Start | Conducting a measurement
HEIDENHAIN | QUADRA-CHEK 2000 Demo | User's Manual | 06/2018