HEIDENHAIN QUADRA-CHEK 2000 Demo User Manual page 65

Quick Start | Conducting a measurement
Filtering features
You can filter the feature list in the Features menu by various criteria. By this
means, only those features are shown that fulfill the filter criteria (e.g., only circles
with a certain minimum diameter).
You can use any combination of filters.
Filter precon-
dition
Type
Size
Tolerance
Selection
Creation type
HEIDENHAIN | QUADRA-CHEK 2000 Demo | User's Manual | 06/2018
Tap the Filter drop-down list
Select the desired filter criterion in the dialog
Select the operator
Select the function
In order to deactivate a filter criterion, deselect it
Tap Close to activate the filter criteria
Operator Function
Is
Only features of the selected geometry type
are shown.
Is not
Only features of the non-selected geometry
type are shown.
Equal
Only features of the specified size are shown.
Greater than
Only features that are larger than the specified
size are shown.
Less than
Only features that are smaller than the speci-
fied size are shown.
Is
Only features that fulfill the selected character-
istic are shown:
Passed
Failed
Inactive
Is not
Only features that do not fulfill the selected
characteristic are shown.
Is
Only the selected features are shown.
Is not
Only the non-selected features are shown.
Is
Only features that fulfill the selected character-
istic are shown.
Is not
Only features that do not fulfill the selected
characteristic are shown.
5
65