Table of Contents
Advertisement
Quick Start | Conducting a measurement
Changing the Fitting algorithm
You can adjust the fitting algorithm depending on the measured feature. The
Gaussian fitting algorithm is used by default.
HEIDENHAIN | QUADRA-CHEK 2000 Demo | User's Manual | 06/2018
Move a feature (e.g., a Circle) from the features list into the
workspace
The Details dialog appears with the Overview tab selected
The fitting algorithm used is shown in the Fitting algorithm
drop-down list
In the Fitting algorithm drop-down list, select the desired
fitting algorithm (e.g., Min. circumscribed)
The feature is displayed according to the selected fitting
algorithm
Figure 22: Circle feature with new fitting algorithm
Tap Close to close the dialog
5
59
Advertisement
Table of Contents
