Table of Contents
Advertisement
5
5.1
Overview
In this chapter an example is used to describe the steps of a typical measuring
sequence. The steps range e.g. from aligning the measured object and measuring
the features through to creating the measurement report.
48
For a detailed description of the individual activities, please refer to the
"Measuring," "Measurement evaluation" and "Measurement reports"
chapters in the QUADRA-CHEK 2000 operating instructions.
Make sure that you have read and understood the "Basic Operation"
chapter before carrying out the actions described below.
Further information:
"Basic Operation", Page 17
HEIDENHAIN | QUADRA-CHEK 2000 Demo | User's Manual | 06/2018
Quick Start | Overview
Advertisement
Table of Contents
