HEIDENHAIN QUADRA-CHEK 2000 Demo User Manual page 80

6
Form field
Tolerance general state
Tolerance type
Tolerance state
Nom. dimension / Toler-
ance zone
Actual value
Deviation
Lower tolerance
Upper tolerance
Lower limit
Upper limit
Trend [-/+++]
Reference, bonus
80
Measurement Report Template | Creating and editing a template
Meaning and application
The overall status of all of the tolerances that have
been inserted into the feature are inserted (e.g.,
Passed, if all of the individual tolerances are good).
The tolerance types applied to the feature are
inserted.
The statuses of the tolerances applied to the
feature are inserted.
The nominal dimension or the value of the toler-
ance zone of a tolerance applying to a feature is
inserted.
The actual dimension of a tolerance applied to the
feature is inserted.
The difference between nominal dimension and
actual dimension is inserted.
The lower tolerance limit of a tolerance applied to
the feature is inserted.
The upper tolerance of a tolerance applied to the
feature is inserted.
The lower limit of a tolerance applied to the feature
is inserted.
The upper limit of a tolerance applied to the feature
is inserted.
The trend of the deviation is inserted.
The tolerance zone is divided into seven segments.
The result is assigned to the corresponding
segment. The corresponding segment is shown as
a trend:
Segment -3: ---
Segment -2: --
Segment -1: -
Segment 0: .
Segment +1: +
Segment +2: ++
Segment +3: +++
The reference feature of a tolerance applied to the
feature is inserted.
If a material requirement is being used, the exist-
ing tolerance bonus is inserted.
HEIDENHAIN | QUADRA-CHEK 2000 Demo | User's Manual | 06/2018