Measurement Report Template | Creating and editing a template
6.2.2
Editing the default settings for the measurement report
HEIDENHAIN | QUADRA-CHEK 2000 Demo | User's Manual | 06/2018
Select the default template you want to use as the basis in
the Template drop-down list
Select the desired unit of measurement in the Unit for
linear values drop-down list
To reduce or increase the number of displayed Decimal
places for linear values, tap – or +
Select the desired unit of measurement in the Unit for
angular values drop-down list
Select the desired format in the Date and time format drop-
down list
To reduce or increase the Grid size, tap – or +
The grid for the auxiliary lines can be set
between 5 and 50. The auxiliary lines are
displayed only in the editor. The smaller the
spacing is between the auxiliary lines, the more
precisely the fields and columns of the form can
be positioned.
To show the page header in the template, activate Display
page header with the ON/OFF sliding switch
To show the report header in the template, activate Display
report header with the ON/OFF sliding switch
6
73