Table of Contents
Advertisement
Basic Operation | Setting the language
3.6
Setting the language
The default language for the user interface is English. You can switch the user
interface to the desired language.
3.7
User interface
3.7.1
User interface after Startup
User interface after startup
If automatic user login is active and the last user who logged in was of the
Operator type, the Measure menu with the workspace and the Inspector is
displayed after the product has started up.
If automatic user login is not active, the product opens the User login menu.
Further information:
HEIDENHAIN | QUADRA-CHEK 2000 Demo | User's Manual | 06/2018
Tap Settings in the main menu
Tap User
The logged-in user is indicated by a check mark
Select the logged-in user
The language selected for the user is indicated by a national
flag in the Language drop-down list
Select the flag for the desired language in the Language
drop-down list
The user interface is displayed in the selected language
"User login menu", Page 33
3
25
Advertisement
Table of Contents
