Table of Contents
Advertisement
Basic Operation | Using the Inspector
3.10
Using the Inspector
The Inspector is only available in the Measure menu.
Activation
3.10.1
Operating elements of the Inspector
Operating
element
HEIDENHAIN | QUADRA-CHEK 2000 Demo | User's Manual | 06/2018
Tap Measure in the main menu
The user interface for measuring, constructing and defining is
displayed
Short description
Quick access menu
The quick access menu displays the current settings for
manual measuring, constructing and defining:
Unit of measurement for linear values (millimeters or
inches)
Magnification used
Type of measuring point acquisition (automatic or
manual)
Coordinate system used
To adjust the settings of the quick access menu, tap the
quick access menu
Position preview
The position preview is only available in the manual
measuring function.
The current axis positions are displayed. If no reference
mark search has been performed, the axis positions are
displayed in red.
To display the position preview in the workspace, tap
the Position preview
The position preview is displayed in the workspace
The current content of the workspace switches to the
Inspector
Features preview
The features preview is available only in the measuring
function.
The features preview displays a reduced view of the
measured, constructed and, defined features.
To display the features view in the workspace, tap
Features preview
The features view is displayed in the workspace
The current content of the workspace switches to the
Inspector
3
37
Advertisement
Table of Contents
