1
1.7
Symbols and fonts used for marking text
In these instructions the following symbols and fonts are used for marking text:
Depiction
...
...
...
...
Bold
10
Fundamentals | Symbols and fonts used for marking text
Meaning
Identifies an action and the result of this action
Example:
Tap OK
The message is closed
Identifies an item of a list
Example:
TTL interface
EnDat interface
...
Identifies menus, displays and buttons
Example:
Tap Shut down
The operating system shuts down
Turn the power switch off
HEIDENHAIN | QUADRA-CHEK 2000 Demo | User's Manual | 06/2018