Removing And Cleaning Basket Rest - Henny Penny Evolution Elite EEE-154 Operator's Manual

3-15. CHANGING THE FILTER
PAD (Continued)
Figure 9
Figure 10
3-16. REMOVING AND
CLEANING BASKET
REST
3-23
Be sure that drain pan, bottom screen, crumb catcher,
and the retaining ring are thoroughly dry before placing
fi lter pad into pan as water will dissolve the fi lter pad.
9. Reassemble in reverse order, placing the bottom screen into
the fi lter pan fi rst, followed by the fi lter pad, retaining ring
and the crumb catcher.
10. Push the fi lter pan assembly back underneath the fryer,
making sure the fi lter tube on the pan makes a good
connection with the fi tting underneath the fryer. Figure 9.
11. Make sure the drain pan stop is engaged and the fryer is
now ready for normal operation. Figure 10.
The basket rest, on the rear shroud of the fryer, should be re-
moved and cleaned periodically.
Use protective gloves when removing the basket rest.
The basket rest may be hot and burns could result.
Grasp the basket rest with 2 hands and pull it off the
"key-ways".
Take it to a sink and clean it with soap and water. Dry thor-
oughly.
Clean the area behind the basket rest and then reinstall the
basket rest.
Model EEE-153, 154
811