Installation; Introduction; Unpacking - Henny Penny Evolution Elite EEE-154 Operator's Manual

2-1. INTRODUCTION

2-2. UNPACKING

Figure 1
711
SECTION 2. INSTALLATION
This section provides the installation and unpacking instructions
for the Henny Penny Evolution Elite
Installation of this unit should be performed only by a
qualifi ed service technician.
Do not puncture the fryer with any objects such as
drills or screws as component damage or electrical
shock could result.
Any shipping damage should be noted in the presence of
the delivery agent and signed prior to his or her departure.
1. Cut and remove the metal bands from the carton.
2. Remove carton lid and lift the main carton off the fryer.
3. Remove corner packing supports (4).
4. Cut the stretch fi lm from around the carrier/rack box and
remove it from the top of the fryer lid.
5. Cut and remove the metal bands holding the fryer to the
pallet, and remove fryer from pallet.
Remove fi lter drain pan and BIB shelf from fryer before
removing fryer from pallet or damage to the unit could
result. Figure 1.
Take care when moving the fryer to prevent personal
injury. The fryer weighs approximately 600 lbs.
(272 kg) to 800 lbs. (363 kg).
Model EEE-153, 154
® fryer.
2-1