Henny Penny Evolution Elite EEE-154 Operator's Manual page 56

6-1. SPECIAL PROGRAM
MODE (Continued)
No. Cook
Product Cycles
Fish 2
French Fries 8
Chicken 4
6-4
Filter Tracking Mode (SP-8)
Filter Tracking signals the operator when the oil needs fi ltering
by counting the number Cook Cycles between fi lters
Press
MODE" show in the display. Use the
buttons to choose either "1.MIXED" fi lter tracking or
"2.GLOBAL".
GLOBAL means all the products have the same number of
cook cycles between fi lters.
MIXED means each product may be set with different
Cycle
number of cook cycles between fi lters. The controls adds
Count
the cycle counts (see example at left) and when the counts
1/2
equal 1 or greater, fi ltering is suggested. Ex: 1 load of fi sh,
1/8
2 loads of french fries, a load of chicken equals 1. 1/2 +
1/4
1/8+1/8+1/4=1.
MIXED
If MIXED is selected, press
"SUGGEST FILTER AT ..." shows in the left display, and a
value between 75% and 100% shows on the right display.
Press the
The lower the value, the sooner the control recommends to
fi lter. Ex: If set to 75%, the control suggest fi ltering after
3/4 of the programmed cook cycles is met, whereas at
100%, all the cook cycles must be completed before the
control suggest fi ltering.
Press
shows in the left display. Press the
choose YES or NO.
If set to YES, when controls suggest fi ltering, "FILTER
LOCKOUT"/"YOU *MUST* FILTER NOW", shows in
the display, and it refuses further cook cycles until the vat is
fi ltered.
Press
the left display and a value between 100% and 250% shows
on the right display. Press the
change this value. The lower the value, the sooner the
"lockout" occurs.
Ex: If set at 100%, "lockout" occurs when the cycle counts
reaches 1 or greater. Set at 200%, twice as many cycles are
counted before "lockout" occurs. See example above.
button and "SP-8" and "FILTER TRACKING
button and "SP-8A" and
and buttons to change this value.
and "SP-8B" and "LOCKOUT ENABLED?"
and "SP-8C" and "LOCKOUT AT..." shows in
Model EEE-153, 154
and
and buttons to
and buttons to
811