Oil Guardian™ (Auto Top-Off); Selecting Product With Different Setpoint; Replacing The Bib - Henny Penny Evolution Elite EEE-154 Operator's Manual

3-7. OIL GUARDIAN™
(Auto Top-Off)
3-8. SELECTING A PRODUCT
WITH A DIFFERENT
SETPOINT

3-9. REPLACING THE BIB

Figure 1
3-9
During normal operation, the control automatically monitors
the oil level in the vat. If the control senses the oil level too
low, the unit automatically pumps oil from the BIB into the vat
to keep the oil at the proper level.
Manual Top-Off
If the oil level is a little low, oil can be added to the vat at any time
from the BIB to raise the oil level to the proper level by following
the steps below. This procedure is NOT to be used to fi ll an empty
vat
1. Press and hold
"*FILTER MENU*", along with "1.EXPRESS FILTER".
2. Press 5 times until "6.FILL FROM BIB" shows in
the display.

3. Press button and display shows "*PUMP" and "EXIT".

4. Press and hold
the oil is pumped from the BIB to the vat.
5. Once frypot is full, release
"*PUMP" and "EXIT". Press X button twice to return to
normal operation.
When selecting a product, if "XXX XXX" shows in the dis-
play, the setpoint temperature is not correct for this product.
To change the setpoint temperature for the desired product:
1. Press product button, for ex:
2. Display shows "XXX XXX".
3. Press and hold a timer button
seconds and then "FRY" shows in display.
4. Allow oil temperature to reach setpoint temperature
before dropping product.
1. Control displays "BIB IS LOW" and an alarm sounds.
2. Open right door and pull BIB from unit. Pull the cap from
top of BIB and discard empty BIB and replace with full
one. Figure 1
Model EEE-153, 154
(either one-full vat) until display shows
button and display shows "FILLING" and

button and display returns to
(FRY).
or for 5
811