Operation Modes - GRAPHTEC GL840 User Manual

3.3 Operation Modes

You can check the system operation status in the status message display.
< Free Running >
Operation
Free Running
Capturing
Replaying while capturing
data
SD CARD replaying
Operation status transition
[REVIEW] key
Replay while capturing
< Capturing >
Description
Startup status, or data is not being captured.
The data is being captured to the SD memory card.
Replaying the data during capture and displaying the
current waveform
Captured data is being replayed
[START/STOP] key
Capturing
[START/STOP] key
[QUIT] key
[DISPLAY] key
<Replaying while capturing data>
[REVIEW] key
Free Running
[QUIT] key
2-screen replaying display
CHAPTER 3 Settings and Measurement
< Replaying >
Simple message display
Free Running
Capturing the data to SD CARD1 or SD
CARD2
Capturing the data to SD CARD1 or SD
CARD2
The data in the SD CARD1 or SD CARD2 is
being replayed.
Replaying
3-17