Charger 2 Damper Installation - Remote - SRAM RockShox RS-1 Service Manual

2 0 0 H o u r S e r v i c e
C h a r g e r 2 D a m p e r ™ I n s t a l l a t i o n - R e m o t e
Clean the knob base.
1 1
Install and seat the lower spool on the cable stop. Position the upper spool
2
RL remote
so the tab is 190° CCW from the cable stop. Install and tighten the retention
screw.
2.5 mm RL remote
2.5 mm 0.9 N·m (8 in-lb)
This concludes the service of your RockShox® RS-1™ RL remote suspension fork.
For Remote user manuals, please visit www.sram.com/service.
Charger 2 Damper™ Installation - Remote 39