SRAM RockShox RS-1 Service Manual page 47

Remove the damper seal head o-ring. Use a pick to pierce and remove the
12
rod wiper seal.
Apply grease and install a new o-ring and rod wiper seal.
Install the stepped face of the rod wiper seal into the threaded end of the
seal head.
Remove the glide ring from the Dig Valve™. Install a new glide ring.
13
Install the damper seal head onto the rebound shaft with the threads
14
oriented toward the piston.
Do not allow the outer lip of the rod wiper seal to fold over when installing
the damper seal head onto the rebound shaft.
NOTICE
Accelerator Damper™ Service 47