Accelerator Damper Installation - SRAM RockShox RS-1 Service Manual

2 0 0 H o u r S e r v i c e
A c c e l e r a t o r D a m p e r ™ I n s t a l l a t i o n
N
Insert the anchor tool into the leg.
1
NOTI CE
Make sure the wiper seal slides onto the tool without folding the outer lip of
the seal.
Feed the hose through the carbon fiber upper until it comes through the
inside of the tool.
Remove the anchor tool.
Anchor tool
Thread the Connectamajig™ into the knurled collar and tighten.
2
6 & 9 mm
Push the XLoc™ button in to the compressed (unlocked) position.
Accelerator Damper™ Installation 54