SRAM RockShox RS-1 Service Manual page 42

Push the XLoc™ button to release it to the extended (locked) position. Rotate
8
the XLoc gate adjuster counter-clockwise, in the direction of the arrow, until
it stops.
Unthread and remove the knurled collar from the Connectamajig™.
NOTICE
Failure to lock the XLoc remote before disconnecting it will result in oil
leaking from the XLoc. This will require a complete bleed of the system.
6 & 9 mm
Loosen the grommet from the assembly hole. Remove the hose and
9
grommet.
Insert the Maxle Ultimate™ through the dropout.
10
24 mm
Leverage the Maxle Ultimate against a bench top, then use a
wrench to unthread the bottom cap counter-clockwise to loosen and
remove it from the stanchion.
Accelerator Damper Removal 42