SRAM RockShox RS-1 Service Manual page 45

Remove the damper anchor o-ring. Apply grease and install a new o-ring.
5
Remove the cartridge tube from the bicycle stand and pour the oil into an
6
oil pan. Cycle the rebound shaft to make sure the oil has drained from the
system.
Clamp the cartridge tube into a bicycle stand with the rebound shaft
7
oriented upward.
Unthread the damper seal head from the cartridge tube and remove the
8
rebound assembly.
The components of this fork are made from lightweight materials and can
be damaged by improper tool usage. Do not allow the wrench to slip off the
wrench flats. This can cause damage by rounding the edges.
NOTICE
22 mm & adjustable wrench
Accelerator Damper™ Service 45