SRAM RockShox RS-1 Service Manual page 49

Rotate the rebound adjuster counter-clockwise to the open position.
19
The rebound adjuster screw will click as it is adjusted.
Pour suspension fluid into the cartridge tube.
20
Pour the fluid slowly to avoid introducing air into the fluid.
Slowly cycle the rebound shaft a few times to bleed the system.
21
⚠ CAU TIO N- E YE HAZA RD
Pull the rebound shaft down slowly. Failure to do so can result in fluid
ejecting from the cartridge tube. Wear safety glasses.
Thread the knurled collar onto the Connectamajig™ until it is finger tight.
22
Push the XLoc™ button in to the compressed (unlocked) position.
2.5 mm
75mL
Accelerator Damper™ Service
5wt
49