SRAM RockShox RS-1 Service Manual page 24

Remote: Remove the upper spool, retention screw, and bottom spool from
2b
the knob base.
Position the fork horizontally in the bicycle stand. Remove the rebound
3
adjuster knob.
Place an oil pan beneath the fork to catch the draining oil.
4
Loosen the damper side bottom bolt 3 to 4 turns.
Strike the bottom bolt to dislodge the shaft from the stanchion.
5
Remove the bottom bolt.
2.5 mm RL remote
Flat blade screwdriver
5 mm
Mallet
RL remote
5 mm
Charger 2 Damper Removal 24