SRAM RockShox RS-1 Service Manual page 25

Remove the stanchion from the carbon fiber upper.
6
If the stanchion does not slide out of the carbon fiber upper, the press fit of
the shaft may still be engaged. Reinstall the bottom bolt 2 to 3 turns and
repeat the previous step.
Insert the anchor tool into the bottom of the carbon fiber upper so that it
7
engages the damper anchor on the Charger 2 Damper™.
Rotate the anchor tool clockwise and unthread the Charger 2 Damper
8
assembly.
Remove the anchor tool and the Charger 2 Damper assembly from the
carbon fiber upper.
Clamp the wrench flats of the Charger 2 Damper assembly in a vise with the
9
rebound shaft oriented upward.
Anchor tool
30 mm socket & anchor tool
Charger 2 Damper Removal 25