H o s e S i z i n g a n d R e m o t e I n s t a l l a t i o n
With the seatpost fully extended and at the desired ride height in the
1
Reverb
frame, route the hose to the handlebar remote location.
Reverb™ Stealth
Hold the hose and turn the handlebar side to side.
2
The proper length of the hose should create a gentle bend and allow
the handlebar to turn side to side.
NOTI CE
Ensure there are no sharp bends in the hydraulic hose. A sharp bend in
the hose will prevent fluid from flowing.
Ensure there is no tension at the remote when the bar is turned. Too
much tension will cause the hose to disconnect from the remote.
Hose Sizing and Remote Installation
20