Rear Vision Mirror - Seat Mii 2014 Owner's Manual

Changing the windscreen wiper blades
● Lifting and unfolding the wiper arms.
● Hold down the release button
blade in the direction of the arrow.
● Fit a new wiper blade of the same length and design on to the wiper arm
and hook it into place.
● Rest the wiper arms back onto the windscreen.
Changing the rear wiper blade
● Lift the windscreen wiper arm and fold it at an angle of approximately
⇒ F ig.
60° 55.
● Press and hold the release button
● Fold the wiper blade towards the windscreen wiper arm
) while simultaneously pulling in the direction of arrow
A
quire some strength.
● Insert a new blade of the same length and type in the windscreen wiper
arm in the opposite direction to the arrow
ture is operational when the knob is in position (arrow
● Return the windscreen wiper arm to the windscreen. Do not let it simply
drop down!
WARNING
Worn or dirty wiper blades reduce visibility and increase the risk of acci-
dent and serious injury.
● Always replace damaged or worn blades or blades which do not clean
the windscreen correctly.
Safety
⇒ F ig. 54
while gently pulling the
1
.
1
⇒ F ig. 55
(arrow
. This may re-
B
and hook into place. This fea-
B
).
A
Operation
CAUTION
● Damaged or dirty windscreen wipers could scratch the glass.
● If products containing solvents, rough sponges or sharp objects are
used to clean the blades, the graphite layer will be damaged.
● Never use fuel, nail varnish remover, paint thinner or similar products to
clean the windows.
Note
If wax deposits, other cleaning products from the automatic car wash, or
other care products, are left on the windscreen and the rear window, the
blades can scratch the glass. Remove wax deposits with a special product
or cleaning cloths.

Rear vision mirror

Rear vision mirror
The driver should always adjust the rear vision mirror to permit adequate
visibility through the rear window.
Advice
Lights and visibility

Fig. 56 Manual anti-daz-
zle function for rear vi-
sion mirror

Technical specifications
75