Related Manuals - Omron NJ501-1400 User Manual

Related Manuals

The following manuals are related to the NJ-series Controllers. Use these manuals for reference.
Manual name Cat. No.
NJ-series CPU Unit W500
Hardware User's Manual
NJ-series CPU Unit Soft- W501
ware User's Manual
NJ-series CPU Unit W507
Motion Control User's
Manual
NJ-series Instructions W502
Reference Manual
NJ-series Motion Control W508
Instructions Reference
Manual
CJ-series Special Unit W490
Manuals for NJ-series W498
CPU Unit W499
W491
Z310
W492
W494
W497
NJ-series CPU Unit Motion Control User's Manual (W507)
Model numbers Application
NJ501-@@@@ Learning the basic specifi-
cations of the NJ-series
CPU Units, including intro-
ductory information,
designing, installation, and
maintenance. Mainly hard-
ware information is pro-
vided.
NJ501-@@@@ Learning how to program
and set up an NJ-series
CPU Unit. Mainly software
information is provided.
NJ501-@@@@ Learning about motion
control settings and pro-
gramming concepts.
NJ501-@@@@ Learning about the specifi-
cations of the instruction
set that is provided by
OMRON.
NJ501-@@@@ Learning about the specifi-
cations of the motion con-
trol instructions that are
provided by OMRON.
CJ1W-@@@@ Learning how to use CJ-
series Units with an NJ-
series CPU Unit.
Related Manuals
Description
An introduction to the entire NJ-series system is
provided along with the following information on
a Controller built with an NJ501 CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
Use this manual together with the NJ-series
CPU Unit Software User's Manual (Cat. No.
W501).
The following information is provided on a Con-
troller built with an NJ501 CPU Unit.
• CPU Unit operation
• CPU Unit features
• Initial settings
• Programming based on IEC 61131-3 lan-
guage specifications
Use this manual together with the NJ-series
CPU Unit Hardware User's Manual (Cat. No.
W500).
The settings and operation of the CPU Unit and
programming concepts for motion control are
described. Use this manual together with the
NJ-series CPU Unit Hardware User's Manual
(Cat. No. W500) and NJ-series CPU Unit Soft-
ware User's Manual (Cat. No. W501).
The instructions in the instruction set (IEC
61131-3 specifications) are described. When
programming, use this manual together with the
NJ-series CPU Unit Hardware User's Manual
(Cat. No. W500) and NJ-series CPU Unit Soft-
ware User's Manual (Cat. No. W501).
The motion control instructions are described.
When programming, use this manual together
with the NJ-series CPU Unit Hardware User's
Manual (Cat. No. W500), NJ-series CPU Unit
Software User's Manual (Cat. No. W501) and
NJ-series CPU Unit Motion Control User's Man-
ual (Cat. No. W507).
The methods and precautions for using CJ-
series Units with an NJ501 CPU Unit are
described, including access methods and pro-
gramming interfaces. Manuals are available for
the following Units.
Analog I/O Units, Insulated-type Analog I/O
Units, Temperature Control Units, ID Sensor
Units, High-speed Counter Units, Serial Com-
munications Units, and DeviceNet Units.
Use these manuals together with the NJ-series
CPU Unit Hardware User's Manual (Cat. No.
W500) and NJ-series CPU Unit Software User's
Manual (Cat. No. W501).
29