Rgb Led Mode; Ac Supported Features - IntesisBox IS-IR-KNX-1i User Manual

KNX – IR Universal AC
®
IntesisBox

5.1.7 RGB LED mode

This parameter determines the working mode of the interface LED.
If set to "Always off" the LED will always be off.
o
If set to "Always on" the LED will always be on.
o
If set to "Only on changes" the LED will always change when there is a change of value in any of the
o
active communication objects.

AC supported features

Select the AC features of your AC unit to match both: the AC unit features with the enabled communication
objects and parameters.
Please, select these parameters carefully, otherwise not expected behavior may occur.
© Intesis Software S.L.U. - All rights reserved
This information is subject to change without notice
IntesisBox ® is a registered trademark of Intesis Software SLU
Figure 5.5 AC supported features
User's manual r1.0 eng
URL http://www.intesisbox.com
Email info@intesisbox.com
tel +34 938047134
18 / 48