GE Sievers 900 Series Operation And Maintenance Manual page 160

Single-Point Calibration Worksheet
Company Name ___________________________
Analyst Name ____________________________
Analyzer Serial Number ____________________
TOC Autozero Performed (Y/N): ______
Reagent Flush Performed (Y/N): ______
Concentration of Standard: ______
Enter data for the TC Calibration:
Expected
Blank N/A
________ ________
Enter data for the IC Calibration:
Expected
________ ________
Measured Concentration - Expected Standard Concentration
% Diff =
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Calibration pass/fail based upon the following criterion:
• The % Diff value for each IC standard is ±10% or less.
Calibration Results:
Calibration Action:
GE Analytical Instruments ©2009
(Line 1)
(Line 2)
(Line 3)
Measured
________
________
Measured
________
Expected Standard Concentration
Passed Failed
Applied Canceled
160 of 236
Date ________________________
Firmware Version _____________
% Diff Adjusted
________ ________
________ ________
% Diff Adjusted
________ ________
×
100%
DLM 90488-01 Rev. A