Using Password Protection; Enabling Password Protection; Changing The Password - GE Sievers 900 Series Operation And Maintenance Manual

Using Password Protection

Enabling Password protection ensures that only authorized personnel access the Analyzer. Once
Password security is enabled, all users must enter the default User ID and Password.

Enabling Password Protection

Enable Password protection by following the steps below.
1. Press the Menu button and select the DataGuard tab.
2. Press the Enable Password button.
When Password security is accepted, the Analyzer security settings are immediately put
into effect and you will be required to log in to the Analyzer with the default administrator
User ID and Password.
3. Press the Login button and use the on-screen keyboard to enter the Login ID and
Password.
User ID: ADMIN
Password: GEAI
After Password has been enabled, you may want to specify the settings, as described
below.

Changing the Password

After Password protection has been enabled, you can change the default Password by following
these steps:
1. Press the Menu button and select the DataGuard tab.
2. Press the Change Password button.
3. Enter the old password and press the Enter button.
4. Enter the new Password using the on-screen keyboard and press the Enter button.
5. Re-enter the same new Password for verification and press the Enter button.
The new Password is now in effect, and you will need to use it starting with the next login.
GE Analytical Instruments ©2009 125 of 236 DLM 90488-01 Rev. A