Chapter 7: Maintenance; Replacing Consumables And Maintenance Items - GE Sievers 900 Series Operation And Maintenance Manual

Chapter 7. Maintenance

Replacing Consumables and Maintenance Items

To ensure optimum performance of the Analyzer, routinely replace Analyzer consumables and
maintenance items. Refer to Table 17 below for the recommended maintenance schedule.
Chemical reagents, the in-line filter, UV lamp, and pump tubing must be purchased from GE
Analytical Instruments. The use of reagents from other sources or failure to replace the reagents on
the prescribed replacement schedule will invalidate the Analyzer's warranty.
If you need additional assistance, contact GE Analytical Instruments Technical Support at
800.255.6964. Training by a qualified service technician also can be provided.
Note that this chapter covers replacement instructions for all routine maintenance items that are
replaced on a regular schedule; instructions for non-routine maintenance items are provided in
those items' packaging.
A one-year maintenance record log is provided for convenience to ensure that all required
maintenance is performed when necessary (see Table 18 on page 193).
GE Analytical Instruments ©2009 171 of 236 DLM 90488-01 Rev. A