Operation - Bosch MUC24 Series Instruction Manual

en

Operation

10. Check the appliance and the accessory
parts for visible damage.
Caution!
Never operate a damaged appliance!
11. Thoroughly clean and dry all parts
before using for the fi rst time. X "Care
and daily cleaning" see page 16
12. After cleaning, insert the pan back into
the appliance interior.
Caution!
Before inserting the pan, check that the
appliance interior is dry and clean.
13. Insert the lid insert
Insert the lid insert into the 2 ducts at
the bottom and press into the lid at the
top.
14. Close the lid
Press the lid down until it clicks into
place.
15. Insert the steam outlet
Place the steam outlet onto the lid from
above and press down fi rmly.
8
MUC2_MUC4_EU2.indb 8
16. Connect the supplied mains cable to the
appliance fi rst and then connect it to the
socket.
Caution!
Use only the supplied mains cable.
On the control panel, buttons B and G
and all LEDs briefl y light up once and a fi ve-
level audible signal sounds. Button B then
fl ashes. The appliance is in standby mode
and is ready for operation.
Operation
Function selection mode
In function selection mode, all preparation
programmes are selected and all settings
are made on the appliance. To do this,
perform the following steps:
W Risk of scalding!
During operation, the appliance must never
be used without the pan and the steam
outlet inserted.
Caution!
Each time prior to operation, check the
appliance for damage, completeness,
cleanliness and proper installation.
X "Before using for the fi rst time" see
page 7
1. The appliance is ready to use. Press
button B in order to access function
selection mode.
15.03.2016 12:58:41